Vauhti Fox Gel Box Sheet

English

FOXGEL waxes are liquid fluor coatings that lend themselves for use on all types of snow. FOXGEL WET can also be applied by ironing. MEDIUM and MINUS gels do not melt in the waxing temperatures, because they are applied cold.

The package net weight is approximately 50g, which equals the waxing of 15-40 pairs of skis.

Use:

1. Always shake the bottle before use.
2. Drip some gel onto the base and spread it immediately to form an even coating film, using the pad in the package.
3. Fix the gel by buffing it mechanically using a natural cork. (see tips!)
4. Once the gel has dried up, clean the base carefully using a nylon brush.

The gels are also ideal for applying top coating layers on grip waxes at temperatures -2°C or above. This reduces the risk of freezing in grip waxes and greatly improves the gliding properties in conditions with a high suction. FoxGel Wet and Medium coating do not impair the grip properties. Minus gel coating is recommended for use on Teho grip waxes or when the grip of the wax is "not good".

Tips for Foxgel waxing:

• Base-wax the skis using hard waxes
• Preheat the bases before applying Foxgel. This makes the gel absorb and stay on the base better and improves its resistance to wear.
• If you apply the gelcoating on hot wax or powder wax, no cork buffing is required.

Resistance to wear in different waxing techniques:

• Outdoors on cold wax == 3-5 km
• Indoors on cold wax == 5-10 km
• On heated cold wax == 15 km
• On powder or compress (block) wax == over 15km

Français

If you have any questions about this web site or it's content please contact with e-mail to "Askus at SkiWax.ca" (replace 'at' with '@') or telephone (519) 747-8032.
SkiWax.ca, 535 Blue Beech Blvd., Waterloo, ON, N2V 2T4.