Five-dollar shipping on orders over $100, Free shipping above $250!

Rode Black Klister K80 - 60g (5C/-2C)

Rode Black Klister K80 - 60g (5C/-2C)


Inventory Status:
Option
Inventory
Shipping
Price
60g
Ships in 2-4 Weeks
Regular price
$19.00
Sale price
$19.00
Unit price
per 

For more information on shipping times and shipping policies, click here.

Why Buy It: An anti-icing klister made mainly from pine tar.

Cost Breakdown: How many pairs of skis can be waxed with this product?

Option
Waxes This Many Pairs Cross Country Skis:
Cost Per Application:
Comparative Price:
60g
20
$0.95 CAD
$ $ $ $ $
From dry to wet snow, icy snow between 5.0°C and -2.0°C
Snow Age Icon
Recommended for:
  • Fresh Falling Snow
  • New Snow
  • Transforming Snow
  • Transformed Snow
  • Old Snow
  • Icy Snow
Features
  1. Comes in a 60g tube
  2. Also known as "Rode Nera"
  3. Smells great! Fresh pine forest scent.
Application Methods

Safety Warning!

In the application process of some ski wax products, you and others can ba exposed to dangerous dust, fumes or residues. With the correct safety protolcols in place, these risks can be mitiagted and waxing can be very safe.

Safe Waxing protolcol:

  1. Always wax in a well-ventilated area. Outside is best. If you have to wax inside make sure there is some sort of air exchanger in place. Range hoods are best. Fans are better than nothing. Be sure to point out any lack of air exchanging equipment to the staff of any waxing facility or the race organizers.
  2. Whenever using any kind of heat in the waxing process (irons, heat guns, torches) always wear a respirator. Respirators that cover your eyes are best and check for a fluorocarbon rating on your respirator. Remember, the most dangerous fumes are not from powders but resins in grip wax and klisters. Wear a mask even when you are using non-fluorinated waxes since fumes from burnt paraffins are not OK to inhale. Respirators are required in the wax room.
  3. When creating any dust in the waxing process (brushing, scraping) always wear a respirator and gloves. Compounds in blocks, liquids, powders, klisters, and other hardwaxes can be absorbed through the skin. Wax companies keep their wax recipes secret so we have no idea what chemical compounds are present in most waxes nor their effects on the body. Always wear gloves while waxing to reduce your risk to negligible levels.
  4. People who are not waxing are not allowed in the wax room.
  5. Be sure to safely dispose of wax shavings and dust. Contained in a plastic garbage bag is adequate.

With the proper level of adult responsibility, any wax can be used perfectly safely and with negligible harm to the environment. Follow the correct safety protocols whenever you enter a wax room and be prepared with the right safety equipment. Remember to enjoy your fast skis to the max!

    Hello from this snippet!

    How to Remove Kick Wax

    Some extra steps specifically for klister removal: (Again in Swedish: See below for English instructions)

    1. When you are done skiing, remove the sticky wax as soon as possible (when it's still cold). You'll have less of a mess if the wax is still chilled. Otherwise, you may find it easier to scrape off at room temperature but the trade-off is the wax will be goopy, flow, and will get everywhere!
    2. Use a grip wax scraper to remove as much of the wax as you can.
    3. Squirt a decent amount of wax remover on the grip zone and let it sit for a minute or two.
    4. Leaving the wax remover on the grip zone, use a bit of Fibertex to rub off any kick wax still stuck to the base until the wax remover is a yucky slurry. Be sure to thoroughly clean the sidewalls and groove of the ski with the Fibertex.
    5. Use a piece of Fiberlene or shop towel to wipe off the slurry from the grip zone and sidewalls.
    6. Soak a section of Fiberlene or shop towel with wax remover and wipe down the grip zone and sidewalls until there's no more stickiness.
    7. Your skis are now ready for travel or storage and your future self will thank you for taking care of business!

    Tools for the Job

    • Ski*Go FiberTex Package (two Sheets)
      Ski*Go FiberTex Package (two Sheets)
      Regular price
      $10.00
      Sale price
      $7.50
      Unit price
      per 
    • Ski*Go Fiberlene (Large or Small)
      Ski*Go Fiberlene (Large or Small)
      Regular price
      $21.00
      Sale price
      $21.00
      Unit price
      per 
    • Ski*Go Grip Scraper with Sandpaper
      Ski*Go Grip Scraper with Sandpaper
      Regular price
      $12.00
      Sale price
      $12.00
      Unit price
      per 
    • Ski*Go Wax Remover (250mL or 1000mL)
      Ski*Go Wax Remover (250mL or 1000mL)
      Regular price
      $18.00
      Sale price
      $18.00
      Unit price
      per 
    • Holmenkol NordicWaxing Spanner
      Holmenkol NordicWaxing Spanner
      Regular price
      $125.00
      Sale price
      $125.00
      Unit price
      per 
    • Ski*Go Single Waxing Bench
      Ski*Go Single Waxing Bench
      Regular price
      $295.00
      Sale price
      $295.00
      Unit price
      per 
    • Ski*Go Double Waxing Bench
      Ski*Go Double Waxing Bench
      Regular price
      $499.00
      Sale price
      $499.00
      Unit price
      per 
    • Ski*Go Waxing Table
      Ski*Go Waxing Table
      Regular price
      $599.00
      Sale price
      $599.00
      Unit price
      per 
Additives
  • Tar