$5 shipping on orders above $100. Free shipping on orders over $250. Ships from Thunder Bay, ON, CAN.

Wool Applicator For Drills

MasterWax Wool Applicator

Slip these wool applicators over a MasterWax roto cork to fleece in MasterWax cold apply waxes. Ends of the wool sleeves are different colours. The red end of the sleeve is for loading with wax and the white end is for buffing/polishing.

Ships World-Wide! $5 shipping on orders above $100 & Free-Shipping above $250 to all North American addresses!
For more information on delivery time estimates and shipping policies, click here. Nearly all items ship from our warehouse in Thunder Bay, Ontario, Canada


Inventory Status:
Option
Inventory
Shipping
Price
PPEL115
5
Ships in 1-2 Days
Regular price
$99.95
Sale price
$99.95
Unit price
per 

Features
  1. This wool applicator fits over the MasterWax roto cork. There is a larger wool applicator that fits the MasterWax motorized machine but this is not it.
  2. Make sure to have one wool applicator for each type of wax. Mixing two waxes on the same applicator causes cross-contamination of the wax compounds and can negatively affect performance.
More MasterWax Tools:
About this series: MasterWax Tools
  • MasterWax Wool Applicator
    Wool Applicator For Drills
    5 in stock!
    Regular price
    $99.95
    Sale price
    $99.95
    Unit price
    per 
  • MasterWax Wool Applicator For Engine
    Wool Applicator For Engine
    8 in stock!
    Regular price
    $149.95
    Sale price
    $149.95
    Unit price
    per 
  • MasterWax Merino Wool Applicator
    MasterWax Merino wool applicator
    Regular price
    Sold out
    Sale price
    $55.95
    Unit price
    per 
  • MasterWax Roto Cork
    Roto Cork
    3 in stock!
    Regular price
    $99.95
    Sale price
    $99.95
    Unit price
    per 
  • MasterWax Roto Cork Handle
    Roto Cork Handle
    Regular price
    Sold out
    Sale price
    $99.95
    Unit price
    per 
  • MasterWax Engine
    Engine
    Regular price
    $1,679.95
    Sale price
    $1,679.95
    Unit price
    per 
Application Methods

Safety Warning!

In the application process of some ski wax products, you and others can ba exposed to dangerous dust, fumes or residues. With the correct safety protolcols in place, these risks can be mitiagted and waxing can be very safe.

Safe Waxing protolcol:

  1. Always wax in a well-ventilated area. Outside is best. If you have to wax inside make sure there is some sort of air exchanger in place. Range hoods are best. Fans are better than nothing. Be sure to point out any lack of air exchanging equipment to the staff of any waxing facility or the race organizers.
  2. Whenever using any kind of heat in the waxing process (irons, heat guns, torches) always wear a respirator. Respirators that cover your eyes are best and check for a fluorocarbon rating on your respirator. Remember, the most dangerous fumes are not from powders but resins in grip wax and klisters. Wear a mask even when you are using non-fluorinated waxes since fumes from burnt paraffins are not OK to inhale. Respirators are required in the wax room.
  3. When creating any dust in the waxing process (brushing, scraping) always wear a respirator and gloves. Compounds in blocks, liquids, powders, klisters, and other hardwaxes can be absorbed through the skin. Wax companies keep their wax recipes secret so we have no idea what chemical compounds are present in most waxes nor their effects on the body. Always wear gloves while waxing to reduce your risk to negligible levels.
  4. People who are not waxing are not allowed in the wax room.
  5. Be sure to safely dispose of wax shavings and dust. Contained in a plastic garbage bag is adequate.

With the proper level of adult responsibility, any wax can be used perfectly safely and with negligible harm to the environment. Follow the correct safety protocols whenever you enter a wax room and be prepared with the right safety equipment. Remember to enjoy your fast skis to the max!

    How to Cold-Apply Pucks (Fleecing)

    Instructional video in Italian, but it gives you the idea. English instrctions below:

    Cold-Apply aka 'Fleecing' is a quick and easy way to get amazingly fast skis. The system uses friction-heat generated by a roto wool applicator to apply a perfect, thin layer of wax to the ski base. The kilometrage you get out of waxes applied by this method tends to be good, but the standout feature is the raw speed of the skis it produces - particularly in warmer temperatures. Fleecing leaves the bare minimum amount of product on the base. This is fantastic because the ski bases' natural structure or stone grind is maximally exposed to the snowpack. Fleeced waxes can be applied either on a completely bare, clean base or a paraffin base wax. As temperatures get colder, it's recommended to fleece over a hard base paraffin. Fleecing produces very little dust or fumes and uses wax very efficiently. The number of steps involved in preparing a fast pair of skis is reduced when compared to other application methods. The speed of skis, speed of application, health and safety, and cost of the cold-apply system make it very attractive. Most people don't know this, but you can fleece any puck from any brand, not just the MasterWax or YESwax pucks. You can also fleece most liquid waxes (once the solvents have evaporated) as long as they do not contain silicone compounds.
    1. Begin by scraping a brushing out your base as thoroughly as possible. Use steel brushes if you have one. Bronze brushes are second-best.
    2. Clean your entire base with a base cleaner or wax remover. Wipe as much dirt and dust off with Fiberlene or shop towel.
    3. Using a piece of Fibertex, energetically rub-down the entire glide zone to remove any microscopic hairs or burrs in the base. Ski*Go's pink paper is also great for this.
    4. If temperatures outside are below -7C, it is recommended to iron, scrape and brush a layer of very hard paraffin melt wax. A green wax is best, blue is second-best.
    5. In your head, mentally divide your wool applicator or roto-fleece in half. Load up half the applicator with product by gently touching the puck to the rotating applicator. Leave the other half of the applicator clean. The clean side is for buffing later on.
    6. Taking the clean ski and using medium force, run the loaded side of the applicator up and down the ski a few times to apply the product.
    7. Once the ski is loaded, switch to the clean side of the applicator and using slightly more pressure, buff out the ski several more times.
    8. Your ski should now be shiny and ready to go fast!

    Tools for the Job

    • Ski*Go Fiberlene (Large or Small)
      Fiberlene
      62 in stock!
      Regular price
      $21.00
      Sale price
      $21.00
      Unit price
      per 
    • Rode Fiber Paper | 25m
      Fiber Paper
      78 in stock!
      Regular price
      $17.95
      Sale price
      $17.95
      Unit price
      per 
    • Rode Glider Cleaner Spray | 150mL
      Glider Cleaner Spray
      73 in stock!
      Regular price
      $19.95
      Sale price
      $19.95
      Unit price
      per 
    • Rode Wall Ski Holder
      Wall Ski Holder
      Regular price
      $23.00
      Sale price
      $23.00
      Unit price
      per 
    • Rode Apron
      Apron
      17 in stock!
      Regular price
      $32.95
      Sale price
      $32.95
      Unit price
      per 
    • Rode Glider Cleaner | 500mL
      Glider Cleaner
      13 in stock!
      Regular price
      $37.95
      Sale price
      $37.95
      Unit price
      per 
    • MasterWax Merino Wool Applicator
      MasterWax Merino wool applicator
      Regular price
      Sold out
      Sale price
      $55.95
      Unit price
      per 
    • Ski*Go Pink Paper Starter Set
      Pink Paper Starter Set
      Regular price
      Sold out
      Sale price
      $89.00
      Unit price
      per 
    • Canadian Winter Sports ProForm-AL1 Wax Bench Station
      Canadian Winter Sports ProForm-AL1 Wax Bench Station
      89 in stock!
      Regular price
      $289.95
      Sale price
      $289.95
      Unit price
      per 
    • MasterWax Roto Cork Handle
      Roto Cork Handle
      Regular price
      Sold out
      Sale price
      $99.95
      Unit price
      per 
    • MasterWax Wool Applicator
      Wool Applicator For Drills
      5 in stock!
      Regular price
      $99.95
      Sale price
      $99.95
      Unit price
      per 
    • MasterWax Roto Cork
      Roto Cork
      3 in stock!
      Regular price
      $99.95
      Sale price
      $99.95
      Unit price
      per 
    • Rode Iron Holder
      Rode Iron Holder for Table.
      Regular price
      $99.95
      Sale price
      $99.95
      Unit price
      per 
    • MasterWax Wool Applicator For Engine
      Wool Applicator For Engine
      8 in stock!
      Regular price
      $149.95
      Sale price
      $149.95
      Unit price
      per 
    • Holmenkol Cross Structure Tool Nordic
      Cross Structure Tool Nordic
      3 in stock!
      Regular price
      $199.00
      Sale price
      $199.00
      Unit price
      per 
    • Holmenkol Cross Structure Kit Nordic
      Cross Structure Kit Nordic
      Regular price
      $199.00
      Sale price
      $199.00
      Unit price
      per 
    • MasterWax Engine
      Engine
      Regular price
      $1,679.95
      Sale price
      $1,679.95
      Unit price
      per