$5 shipping on orders above $100. Free shipping on orders over $250. Ships from Thunder Bay, ON, CAN.
Waxremover HC3 Angle 1
Waxremover HC3 Angle 2

Toko Waxremover HC3

Toko Waxremover HC3 is a gentle cleaning liquid for all types of bases. Removes wax residue as well as dirt and prepares the base for waxing.

Ships World-Wide! $5 shipping on orders above $100 & Free-Shipping above $250 to all North American addresses!
For more information on delivery time estimates and shipping policies, click here. Nearly all items ship from our warehouse in Thunder Bay, Ontario, Canada


Inventory Status:
Option
Inventory
Shipping
Price
500ml
Ships in 2-4 Weeks
$30.00
$30.00
2500ml
Ships in 2-4 Weeks
$120.00
$120.00
Features
  1. Comes in a 500 mL bottle or 2500 mL jug
  2. Wait 10 min after application to begin waxing
More Toko Base Cleaners:
About this series: Toko Base Cleaners
  • Pump-Up Sprayer Angle 1
    1 in stock!
    $90.00
    $90.00
  • Racing Waxremover Angle 1
    2 in stock!
    $75.00
    $75.00
  • Waxremover HC3 Angle 1
    $30.00
    $30.00
  • Waxremover Spray HC3 Angle 1
    4 in stock!
    $30.00
    $30.00
  • Gel Clean Spray HC3 Angle 1
    5 in stock!
    $30.00
    $30.00
Application Methods

Safety Warning!

In the application process of some ski wax products, you and others can ba exposed to dangerous dust, fumes or residues. With the correct safety protolcols in place, these risks can be mitiagted and waxing can be very safe.

Safe Waxing protolcol:

  1. Always wax in a well-ventilated area. Outside is best. If you have to wax inside make sure there is some sort of air exchanger in place. Range hoods are best. Fans are better than nothing. Be sure to point out any lack of air exchanging equipment to the staff of any waxing facility or the race organizers.
  2. Whenever using any kind of heat in the waxing process (irons, heat guns, torches) always wear a respirator. Respirators that cover your eyes are best and check for a fluorocarbon rating on your respirator. Remember, the most dangerous fumes are not from powders but resins in grip wax and klisters. Wear a mask even when you are using non-fluorinated waxes since fumes from burnt paraffins are not OK to inhale. Respirators are required in the wax room.
  3. When creating any dust in the waxing process (brushing, scraping) always wear a respirator and gloves. Compounds in blocks, liquids, powders, klisters, and other hardwaxes can be absorbed through the skin. Wax companies keep their wax recipes secret so we have no idea what chemical compounds are present in most waxes nor their effects on the body. Always wear gloves while waxing to reduce your risk to negligible levels.
  4. People who are not waxing are not allowed in the wax room.
  5. Be sure to safely dispose of wax shavings and dust. Contained in a plastic garbage bag is adequate.

With the proper level of adult responsibility, any wax can be used perfectly safely and with negligible harm to the environment. Follow the correct safety protocols whenever you enter a wax room and be prepared with the right safety equipment. Remember to enjoy your fast skis to the max!

    How to Remove Kick Wax

    Some extra steps specifically for klister removal: (Again in Swedish: See below for English instructions)

    1. When you are done skiing, remove the sticky wax as soon as possible (when it's still cold). You'll have less of a mess if the wax is still chilled. Otherwise, you may find it easier to scrape off at room temperature but the trade-off is the wax will be goopy, flow, and will get everywhere!
    2. Use a grip wax scraper to remove as much of the wax as you can.
    3. Squirt a decent amount of wax remover on the grip zone and let it sit for a minute or two.
    4. Leaving the wax remover on the grip zone, use a bit of Fibertex to rub off any kick wax still stuck to the base until the wax remover is a yucky slurry. Be sure to thoroughly clean the sidewalls and groove of the ski with the Fibertex.
    5. Use a piece of Fiberlene or shop towel to wipe off the slurry from the grip zone and sidewalls.
    6. Soak a section of Fiberlene or shop towel with wax remover and wipe down the grip zone and sidewalls until there's no more stickiness.
    7. Your skis are now ready for travel or storage and your future self will thank you for taking care of business!

    Tools for the Job

    • Multiscraper
      165 in stock!
      $4.95
      $4.95
    • Fibertex Green, Hand (3 sheets/pack)
      $9.36
      $9.36
    • Fiberlene
      20 in stock!
      $21.00
      $21.00
    • Ski*Go Grip Scraper with Sandpaper
      Sold out
      $11.99
    • Wax Remover Spray 2.0
      54 in stock!
      $18.95
      $14.95
    • Fiber Paper
      67 in stock!
      $17.95
      $17.95
    • Rode Wax Remover 2.1 150mL Spray bottle
      501 in stock!
      $17.95
      $17.95
    • Wall Ski Holder
      $23.00
      $23.00
    • Apron
      19 in stock!
      $32.95
      $32.95
    • Canadian Winter Sports ProForm-AL1 Wax Bench Station
      237 in stock!
      $289.95
      $289.95