$5 shipping on orders above $100. Free shipping on orders over $250. Ships from Thunder Bay, ON, CAN.
GIGA SPEED Wet Powder

Gallium GIGA SPEED Wet Powder | 30g (10C/-1C)

When you need maximum water repulsion, this is the powder you can turn to get the job done. Pure fluoro compound handles dirt and is highly hydrophobic.

Ships World-Wide! $5 shipping on orders above $100 & Free-Shipping above $250 to all North American addresses!
For more information on delivery time estimates and shipping policies, click here. Nearly all items ship from our warehouse in Thunder Bay, Ontario, Canada


Inventory Status:
Option
Inventory
Shipping
Price
30g
10
Ships in 1-2 Days
$300.00
$239.00
Features
  1. Suitable for soft snow which is very wet and dirty.
  2. Same product as GIGA SPEED Wet block. Use the block for shorter races, and this powder for longer races.
  3. Top notch on soft snow, especially melted new snow, sleety snow.
  4. If it's raining, this is the powder to use.
  5. On wet granular or wet artificial snow, mix with Powder Moist or Dry for better performance.

Cost Breakdown: How many pairs of skis can be waxed with this product?

Option
Waxes This Many Pairs of Cross Country Skis:
Cost Per Application:
Comparative Price:
30g
10
$23.90 CAD
$ $ $ $ $
New Wet Snow or Wet Dirty Snow between 10.0°C and -1.0°C
Pink Conditions - Wet, New Snow (+20C/0C) Yellow Conditions - Wet, Slushy Snow (+20C/0C) Brown Conditions - Dirty Snow
Snow Age Icon
Recommended for these snow types:
  • Fresh Falling
  • New
  • Transforming
  • Transformed
  • Old
  • Icy
  • Man-Made
More Gallium GIGA SPEED Powders:
About this series: Gallium's series of racing powders. The dry powder contains elemental gallium for a hard-as-metal finish to your race skis.
  • GIGA SPEED Moist Powder
    3 in stock!
    $300.00
    $239.00
  • GIGA SPEED Wet Powder
    10 in stock!
    $300.00
    $239.00
  • GIGA SPEED Dry Powder
    2 in stock!
    $270.00
    $216.00
Application Methods

Safety Warning!

In the application process of some ski wax products, you and others can ba exposed to dangerous dust, fumes or residues. With the correct safety protolcols in place, these risks can be mitiagted and waxing can be very safe.

Safe Waxing protolcol:

  1. Always wax in a well-ventilated area. Outside is best. If you have to wax inside make sure there is some sort of air exchanger in place. Range hoods are best. Fans are better than nothing. Be sure to point out any lack of air exchanging equipment to the staff of any waxing facility or the race organizers.
  2. Whenever using any kind of heat in the waxing process (irons, heat guns, torches) always wear a respirator. Respirators that cover your eyes are best and check for a fluorocarbon rating on your respirator. Remember, the most dangerous fumes are not from powders but resins in grip wax and klisters. Wear a mask even when you are using non-fluorinated waxes since fumes from burnt paraffins are not OK to inhale. Respirators are required in the wax room.
  3. When creating any dust in the waxing process (brushing, scraping) always wear a respirator and gloves. Compounds in blocks, liquids, powders, klisters, and other hardwaxes can be absorbed through the skin. Wax companies keep their wax recipes secret so we have no idea what chemical compounds are present in most waxes nor their effects on the body. Always wear gloves while waxing to reduce your risk to negligible levels.
  4. People who are not waxing are not allowed in the wax room.
  5. Be sure to safely dispose of wax shavings and dust. Contained in a plastic garbage bag is adequate.

With the proper level of adult responsibility, any wax can be used perfectly safely and with negligible harm to the environment. Follow the correct safety protocols whenever you enter a wax room and be prepared with the right safety equipment. Remember to enjoy your fast skis to the max!

    How to Apply Powdered Glide Waxes

    Instructional video in Swedish, but it gives you the idea. English instructions below:

    Falsely condisered an advanced waxing technique, applying glide powders is acutally very easy. Most powders require an iron temperature of 180C or more so make sure you have a high-quality iron that will reach 180C.
    1. Begin by making sure your skis are clean. Scrape then brush gently with a steel or brass brush and treated with a base cleaner if required. Powders can be applied to a completely bare base in warm conditions, or over a base paraffin - generally in colder conditions.
    2. Pre-heat your iron to the temperature recommended by the wax company for the particular powder you will be using. Iron temperatures for powders are usually between 160C and 180C.
    3. Tap a line of powder up and down the ski on both sides of the groove.
    4. Using the iron, stamp down the powder to quickly melt it into the base. Because the iron is so hot, be careful not to let it rest in one place for too long.
    5. Give the powder one more quick pass with the iron. Don't worry about melting all the powder into the base at this point. Our main concern is not to burn the ski base.
    6. Let the ski cool. 5 minutes.
    7. Using a nylon brush dedicated for pure fluoro use only, loosen the powder. You can now iron, cork, or roto cork the powder in one more time for better durability and speed.
    8. Let the ski cool one more time.
    9. Using a horsehair hand brush or roto brush, vigorously brush away the excess left-over wax. 8-10 passes with a hand brush should be enough or a few passes with the roto-brush.
    10. For colder powders, give the ski a few passes with a steel or brass brush. Start at the tip and move to the tail using a very light pressure.
    11. To polish, use a nylon hand brush or nylon roto-brush. 10-15 passes with a hand brush or 3-4 with a roto brush should be plenty. Your ski base should now be very shiny.
    12. Consider topping off your ski by adding a quick layer of liquid wax or puck, structure with a rill tool if there is a lot of moisture in the snow, or if it is very cold or dry, finish the ski with some Ski*Go pink paper. Your skis are now race ready!

    Tools for the Job

    • Groove Scraper
      245 in stock!
      $5.95
      $5.95
    • 25 in stock!
      $6.95
      $6.95
    • Rode 3mm Plexiglass scraper|Rode 4mm Plexiglass scraper
      405 in stock!
      $8.95
      $8.95
    • Fiber Paper
      81 in stock!
      $17.95
      $17.95
    • Glider Cleaner Spray
      151 in stock!
      $19.95
      $19.95
    • 1 in stock!
      $23.95
      $23.95
    • 1 in stock!
      $23.95
      $23.95
    • Horsehair Handbrush
      95 in stock!
      $25.95
      $25.95
    • Soft Nylon Handbrush
      150 in stock!
      $25.95
      $25.95
    • Rode Wall Ski Holder
      92 in stock!
      $29.95
      $29.95
    • Apron
      23 in stock!
      $29.95
      $29.95
    • Glider Cleaner
      71 in stock!
      $39.95
      $39.95
    • Bronze Handbrush
      159 in stock!
      $45.95
      $45.95
    • Horsehair Roto Brush
      28 in stock!
      $64.95
      $64.95
    • Hard Nylon Roto Brush
      34 in stock!
      $64.95
      $64.95
    • Soft Nylon Roto Brush
      31 in stock!
      $64.95
      $64.95
    • CWS Proform AL-1 Waxing bench Station
      38 in stock!
      $669.95
      $669.95
    • Roto Handle
      193 in stock!
      $99.95
      $99.95
    • $99.95
      $99.95
    • Rode Iron Holder for Table.
      8 in stock!
      $119.95
      $119.95
    • Digital Waxing Iron / 180°C / 15mm plate / 110v / (Dial Control, Digital Readout)
      2 in stock!
      $444.95
      $444.95
    • Digital Waxing Iron / 180°C / 15mm plate / 110v / Touchpad Control, Digital Readout)
      1 in stock!
      $519.95
      $519.95
    • Digital Waxing Iron / 200°C / 25mm plate / 110v / (Touchpad Control, Digital Readout)
      $799.95
      $799.95
Additives
  • Pure Fluoros
Item is added to cart