Features
- Comes in a 45g tin
- A basic grip wax for recreational skiing and training.
Cost Breakdown: How many pairs of skis can be waxed with this product?
45g
60
$0.20 CAD
$
$
$
$
$
All Snow Types between -5.0°C and -15.0°C
Recommended for these snow types:
- Fresh Falling
- New
- Transforming
- Transformed
- Old
- Icy
- Man-Made
About this series:
Grip wax with finely tuned synthetic compounds to give the optimal grip and glide characteristics no matter the temperature.
-
Vauhti GS Base Super Base Binder | 45g (20C/-30C)
![A base binder for old, abrasive snow]()
1 in stock!- Regular price
- $12.00
- Sale price
- $12.00
- Unit price
- per
-
Vauhti GS Base AT Base Binder | 45g (20C/-30C)
![A base binder for new to fine-grained snow]()
- Regular price
- $12.00
- Sale price
- $12.00
- Unit price
- per
-
Vauhti GS Green Hardwax | 45g (-10C/-30C)
![Synthetic Hardwax for cold temperatures]()
3 in stock!- Regular price
- $12.00
- Sale price
- $12.00
- Unit price
- per
-
Vauhti GS Blue Hardwax | 45g (-5C/-15C)
![Synthetic Hardwax for colder temperatures]()
3 in stock!- Regular price
- $12.00
- Sale price
- $12.00
- Unit price
- per
-
Vauhti GS Red Hardwax | 45g (1C/-2C)
![Synthetic Hardwax for temperatures around zero degrees]()
3 in stock!- Regular price
- $12.00
- Sale price
- $12.00
- Unit price
- per
Application Methods
Safety Warning!
In the application process of some ski wax products, you and others can ba exposed to dangerous dust, fumes or residues. With the correct safety protolcols in place, these risks can be mitiagted and waxing can be very safe.
Safe Waxing protolcol:
- Always wax in a well-ventilated area. Outside is best. If you have to wax inside make sure there is some sort of air exchanger in place. Range hoods are best. Fans are better than nothing. Be sure to point out any lack of air exchanging equipment to the staff of any waxing facility or the race organizers.
- Whenever using any kind of heat in the waxing process (irons, heat guns, torches) always wear a respirator. Respirators that cover your eyes are best and check for a fluorocarbon rating on your respirator. Remember, the most dangerous fumes are not from powders but resins in grip wax and klisters. Wear a mask even when you are using non-fluorinated waxes since fumes from burnt paraffins are not OK to inhale. Respirators are required in the wax room.
- When creating any dust in the waxing process (brushing, scraping) always wear a respirator and gloves. Compounds in blocks, liquids, powders, klisters, and other hardwaxes can be absorbed through the skin. Wax companies keep their wax recipes secret so we have no idea what chemical compounds are present in most waxes nor their effects on the body. Always wear gloves while waxing to reduce your risk to negligible levels.
- People who are not waxing are not allowed in the wax room.
- Be sure to safely dispose of wax shavings and dust. Contained in a plastic garbage bag is adequate.
With the proper level of adult responsibility, any wax can be used perfectly safely and with negligible harm to the environment. Follow the correct safety protocols whenever you enter a wax room and be prepared with the right safety equipment. Remember to enjoy your fast skis to the max!
- Check your skis for grip zone markers. Kick wax is only applied to the zone under the binding of the ski leaving the tips and tails of the ski free for glide waxing. A good grip zone will be roughly 45cm long but will vary a lot depending on how stiff your skis are (the camber). Your local ski shop can help you find your grip zones, or you can use the zones pre-marked on the sidewalls of your skis. Use a permanent marker to redefine your grip zones as often as you can and experiment with extending your grip zone further forwards or backward to find the right feel while skiing.
- Prepare your grip zone by cleaning with wax remover and roughing with sandpaper.
- If the snow is icy or if you're planning on skiing more than 10km, apply a base binder.
- Crayon on a thin, even layer of hardwax over the entire grip zone. Use the wax tin like a marker!
- Using a cork dedicated to either warm kick wax or cold wax, (it's a good idea to have a couple of corks: one for warm wax and another for cold wax to avoid cross-contamination between sticky and not-so-sticky waxes) cork in the layer of wax. The goal is to make each layer of wax good and smooth. Some waxes will become transparent when they are adequately corked.
- Apply and cork 2-6 layers hardwax until you reach the desired thickness. With kick waxes for warmer temperatures, having thicker layers than you'd normally use is important to achieve the same level of grip. With each successive layer of grip wax, shorten the length of the layer until you're only putting a short layer underneath the toe.
-
Vauhti Sandpaper for synthetic cork (3 pcs) 80 (Coarse)|100 (Medium)|120 (Fine)
![Replacement Sandpaper for Vauhti's Sandpaper Cork.]()
1 in stock!- Regular price
- $9.99
- Sale price
- $9.99
- Unit price
- per
-
Ski*Go Grip Scraper with Sandpaper
![Ski*Go Grip Scraper with Sandpaper]()
4 in stock!- Regular price
- $11.99
- Sale price
- $11.99
- Unit price
- per
-
Rode Steel Table with Cross-Country Ski Form
![Steel Table with Cross-Country Ski Form]()
- Regular price
-
$800.00 - Sale price
- $659.00
- Unit price
- per
How to Crayon and Cork Hardwaxes
Tools for the Job
- When you are done skiing, remove the sticky wax as soon as possible (when it's still cold). You'll have less of a mess if the wax is still chilled. Otherwise, you may find it easier to scrape off at room temperature but the trade-off is the wax will be goopy, flow, and will get everywhere!
- Use a grip wax scraper to remove as much of the wax as you can.
- Squirt a decent amount of wax remover on the grip zone and let it sit for a minute or two.
- Leaving the wax remover on the grip zone, use a bit of Fibertex to rub off any kick wax still stuck to the base until the wax remover is a yucky slurry. Be sure to thoroughly clean the sidewalls and groove of the ski with the Fibertex.
- Use a piece of Fiberlene or shop towel to wipe off the slurry from the grip zone and sidewalls.
- Soak a section of Fiberlene or shop towel with wax remover and wipe down the grip zone and sidewalls until there's no more stickiness.
- Your skis are now ready for travel or storage and your future self will thank you for taking care of business!
-
Ski*Go FiberTex Package (two Sheets)
![FiberTex]()
1 in stock!- Regular price
-
$10.00 - Sale price
- $7.50
- Unit price
- per
-
Ski*Go Fiberlene (Large or Small)
![Fiberlene]()
115 in stock!- Regular price
- $21.00
- Sale price
- $21.00
- Unit price
- per
-
Ski*Go Grip Scraper with Sandpaper
![Ski*Go Grip Scraper with Sandpaper]()
4 in stock!- Regular price
- $11.99
- Sale price
- $11.99
- Unit price
- per
-
Vauhti GRIP REMOVER 80mL|500mL|1000mL
![Vauhti's Kick Wax Remover]()
5 in stock!- Regular price
- $22.00
- Sale price
- $22.00
- Unit price
- per
-
Rode Steel Table with Cross-Country Ski Form
![Steel Table with Cross-Country Ski Form]()
- Regular price
-
$800.00 - Sale price
- $659.00
- Unit price
- per
How to Remove Kick Wax
Some extra steps specifically for klister removal: (Again in Swedish: See below for English instructions)
