An image representing the Klister Binder Application product collection on | Skiwax.ca

Klister Binders for REAL Durability!

Some aggressive conditions call for an aggressive binder! Slap on a super hard binder to keep your grip for the whole race! Whether you are using a designated base klister, or a blue or purple klister, this is the step by step of what you need to do to be successful!

How-To Video

Steps may differ in the video from what we recommend!

Step-by-Step

1) Check your skis for grip zone markers on your classic wax skis. Kick wax is only applied to the zone under the binding of the ski leaving the tips and tails of the ski free for glide waxing. A good grip zone is between 40cm and 60 cm long but will vary depending on the stiffness of your skis (the camber). Your local ski shop can help you find your grip zones, or you can use the zones pre-marked on the sidewalls of your skis. Use a permanent marker to redefine your grip zones as often as you can and experiment with extending your grip zone further forwards or backward to find the right feel while skiing. Your klister zone should be shorter than a standard kick wax pocket.

2) Prepare your grip zone by cleaning it with wax remover and roughing it with sandpaper. If you're unsure how to do this, check out the instructions here: https://skiwax.ca/collections/cleaning-grip-zones. To prevent grip and glide wax from mixing, use masking tape to separate your grip zone from your glide zone.

3) Once the grip zone is dry, dab your binder klister in a chevron pattern onto your grip zone. Put as much klister as you need for whatever your gripping wax will be; a thicker, warmer wax will need less binder than a thinner, colder wax.

4) Using a heat source such as a 'kick wax only' iron, heat gun or torch, smooth out the base binder. If you are using a heat gun or torch, use a klister binder-designated synthetic cork to smooth out the base binder. If you are using an iron, make sure you only ever use that iron for kick waxes and NEVER in a glide zone. An iron works the best to make the binder flat and smooth.

5) Let the base binder cool for a few minutes. Set the ski outside to speed up the cooling. When cooled, you are now ready to apply your wax of the day! If your binder has frozen completely solid, you may need to reheat the binder lightly using a cork to allow adhesion to your wax of the day. When you reheat, only cork until you feel some friction in your strokes; you do not want the binder to get malleable again.

Products for Klister Binders for REAL Durability!

7 products

Ski Waxing Safety Measures

Safe Ski Waxing: Protect Yourself While Prepping Your Skis

Ski waxing is key to great performance on the snow, but it involves chemicals, heat, dust, and fumes that require careful handling. Prioritizing safety protects your health and ensures the waxing process is both effective and responsible.

Follow these essential safety practices every time you wax:

1. Maximize Ventilation: Fresh Air is Crucial 🌬️

  • Why? Hot waxing, solvents, and brushing release fumes and fine dust particles that shouldn't be inhaled.
  • Best Practice: Wax outdoors whenever possible.
  • Indoors: Ensure excellent air exchange.
    • Work near open windows or doors.
    • Use powerful exhaust fans (like range hoods or dedicated extraction systems) vented directly outside.
    • Simple fans just circulating air within the room are not sufficient.
  • Speak Up: If you're in a shared facility (like a team wax room or event) and ventilation seems poor, notify staff or organizers immediately. If you can strongly smell fumes or wax, ventilation isn't adequate.

2. Protect Your Lungs: Use a Respirator 😷

  • Why? Waxing generates harmful airborne particles and fumes from multiple sources:
    • Smoke/fumes from hot waxing irons or machines.
    • Dust from scraping and brushing wax.
    • Vapors from evaporating solvents in liquid waxes and cleaners.
    • Dust from fleece/wool application methods.
    • Fumes from heating grip waxes and klisters.
  • Action: Wear a respirator suitable for both particulates (dust) and organic vapors (fumes/solvents).
    • Look for respirators with P100 particulate filters combined with organic vapor cartridges.
    • Ensure a proper fit. Facial hair can prevent a good seal.
    • Replace filters and cartridges according to the manufacturer's recommendations or when you notice smell/taste breakthrough or increased breathing resistance.

3. Protect Your Eyes: Wear Safety Glasses 👓

  • Why? Dust, flying wax particles, and potential splashes from cleaners can irritate or injure your eyes.
  • Action: Always wear safety glasses or goggles. A full-face respirator also provides eye protection.

4. Protect Your Skin: Wear Gloves 🧤

  • Why? Waxes and solvents contain chemicals that can be absorbed through the skin or cause irritation.
  • Action: Wear chemical-resistant gloves (nitrile gloves are a common and effective choice). This keeps your hands clean and prevents direct skin contact with potentially harmful substances.

5. Maintain a Safe Wax Room Environment 🚫

  • Control Access: Only those actively involved in waxing should be in the immediate waxing area to minimize exposure for others.
  • No Food or Drink: Never eat, drink, smoke, or store food in the waxing area. This prevents accidental ingestion of harmful residues.
  • Cleanliness: Keep your workspace tidy. Clean up spills immediately and manage wax scrapings (see next point).

6. Handle Wax Waste Responsibly ♻️

  • Why? Wax shavings and dust contain the same chemicals you're protecting yourself from during application. Proper disposal protects the environment and prevents contamination.
  • Action:
    • Collect all wax shavings, dust, and used cleaning materials (paper towels, rags).
    • Place them promptly into a sealed plastic bag or designated waste container.
    • Dispose of according to local regulations. (Note: Regulations for fluorinated wax disposal might be stricter in some areas – check local rules).

7. Control Your Iron Temperature 🔥

  • Why? Overheating wax creates significantly more fumes and can damage your ski base.
  • Action: Always use the wax manufacturer's recommended temperature for your specific wax. Don't guess!

8. Handle Cleaners & Solvents with Extra Care 🧪

  • Why? Base cleaners and liquid waxes often contain volatile organic compounds (VOCs) that are easily inhaled and can be flammable.
  • Action:
    • Use solvents and cleaners sparingly.
    • Ensure maximum ventilation when applying them.
    • Keep containers sealed when not in use.
    • Crucially: Keep solvents far away from heat sources like your waxing iron, space heaters, or open flames.

Your Health Comes First!

By consistently following these safety protocols, you protect yourself from potential respiratory issues, skin irritation, and other health effects. Safe waxing allows you to focus on getting the best performance from your skis and fully enjoy your time on the snow.