$5 shipping on orders above $100. Free shipping on orders over $250. Ships from Thunder Bay, ON, CAN.
Swix Wax Machine 110V
Swix Wax Machine 110V
Swix Wax Machine 110V

Swix Wax Machine 110V

The Swix T60 waxing roller machine speeds up the waxing process when using melt gliders or klisters. With a digital temperature control to keep wax liquified in the reservoir, the machine's roller is used to apply a precise layer of wax to skis in seconds. The machine rolls wax neatly and efficiently in a single, fast swipe. The machine is much easier to use than a waxing iron - less drips onto the floor. Works on skis up to 136mm in width.

Ships World-Wide! $5 shipping on orders above $100 & Free-Shipping above $250 to all North American addresses!
For more information on delivery time estimates and shipping policies, click here. Nearly all items ship from our warehouse in Thunder Bay, Ontario, Canada


Inventory Status:
Option
Inventory
Shipping
Price
SWT60-110
Ships in 2-4 Weeks
$499.95
$499.95
Features
  1. 110-volt version with North American plugs
  2. Precise - and digital temperature control
  3. For skis up to 136 mm width
  4. For cross country and alpine skis
  5. The wax tray is exchangeable and comes with a lid, which allows for dedicated trays for specific waxes, and therefore no need for cleaning in between use.
  6. Extra trays are sold separately
More Swix Waxing Irons:
About this series: Swix Waxing Irons
  • T70 Extreme Digital Waxing Iron Angle 1
    1 in stock!
    $899.95
    $899.95
  • 1 in stock!
    $859.95
    $859.95
  • Swix Wax Machine 110V
    $499.95
    $499.95
  • T72 Racing Digital Iron Angle 1
    4 in stock!
    $499.95
    $499.95
  • T73D Sport Digital Waxing Iron Angle 1
    1 in stock!
    $164.95
    $164.95
  • Swix Wax Machine Tray
    $99.95
    $99.95
  • T77 Economy Waxing Iron Angle 1
    4 in stock!
    $89.95
    $89.95
  • Iron Cover Angle 1
    1 in stock!
    $74.95
    $74.95
Application Methods

Safety Warning!

In the application process of some ski wax products, you and others can ba exposed to dangerous dust, fumes or residues. With the correct safety protolcols in place, these risks can be mitiagted and waxing can be very safe.

Safe Waxing protolcol:

  1. Always wax in a well-ventilated area. Outside is best. If you have to wax inside make sure there is some sort of air exchanger in place. Range hoods are best. Fans are better than nothing. Be sure to point out any lack of air exchanging equipment to the staff of any waxing facility or the race organizers.
  2. Whenever using any kind of heat in the waxing process (irons, heat guns, torches) always wear a respirator. Respirators that cover your eyes are best and check for a fluorocarbon rating on your respirator. Remember, the most dangerous fumes are not from powders but resins in grip wax and klisters. Wear a mask even when you are using non-fluorinated waxes since fumes from burnt paraffins are not OK to inhale. Respirators are required in the wax room.
  3. When creating any dust in the waxing process (brushing, scraping) always wear a respirator and gloves. Compounds in blocks, liquids, powders, klisters, and other hardwaxes can be absorbed through the skin. Wax companies keep their wax recipes secret so we have no idea what chemical compounds are present in most waxes nor their effects on the body. Always wear gloves while waxing to reduce your risk to negligible levels.
  4. People who are not waxing are not allowed in the wax room.
  5. Be sure to safely dispose of wax shavings and dust. Contained in a plastic garbage bag is adequate.

With the proper level of adult responsibility, any wax can be used perfectly safely and with negligible harm to the environment. Follow the correct safety protocols whenever you enter a wax room and be prepared with the right safety equipment. Remember to enjoy your fast skis to the max!

    Cold Weather Waxing
    Warm Weather Waxing

    How to Apply Klister

    Video in Swedish, but it will give you the idea. (English instructions below)

    Klisters are the stickiest kick waxes. They're so sticky they come in a tube, like toothpaste. Klister is the best way to get grip in super icy snow or in very warm, wet snow. Klister is often viewed as a huge pain to use but it can actually be used just as easily as any hardwax. If you are skiing a shorter distance, red klisters and warmer can be applied with only a cork. You'll probably need a heat source for violet klisters and colder. The best kick you'll ever have will probably be on a klister day so don't miss out because you think it will be too messy!
    1. Check your skis for grip zone markers. Kick wax is only applied to the zone under the binding of the ski leaving the tips and tails of the ski free for glide waxing. Because klister is meant to be applied very thick, your klister "zone" or klister "pocket" is shorter than your normal hardwax grip zone - usually shorter by an inch or two at the front and back of the grip zone. Use a permanent marker to redefine your klister as often as you can by marking it with a "k" on the sidewall of your skis. Experiment with extending your grip zone further forwards or backward to find the right feel while skiing.
    2. Prepare your grip zone by cleaning with wax remover and roughing with sandpaper.
    3. Base binders are less important with klisters, but if the snow is very icy and you plan on skiing more than 10km, consider using a base binder.
    4. With the klister tube, dab a thin layer in a chevron pattern. You may need to heat the tube with a heat gun or torch to make it flow nicely. Feel free to mix and match different klisters to make your own perfect mix. Often klisters are mixed 50/50, 70/30, etc... by wax techs.
    5. Using a heat source such as a dedicated kick wax iron, heat gun or torch, smooth out the klister. If you are using a heat gun or torch, use a cork a small metal-bristled chef's brush to smooth out the klister. If you are using an iron, make sure you only ever use it for kick wax. Have another iron for glide waxes only to avoid cross-contamination.
    6. Let the klister cool for a few minutes. Set the ski outside over the snow (but not touching the snow) to speed the cooling.
    7. Once the klister is cool, you may need to "cover" it. A "klister cover" is a couple of layers of hardwax used to give klister a bit more glide factor if the klister has too much "bite".

    Tools for the Job

    • Multiscraper
      114 in stock!
      $4.95
      $4.95
    • Shop Towel Roll
      34 in stock!
      $6.95
      $6.95
    • Synthetic Cork
      413 in stock!
      $9.95
      $9.95
    • Fibertex Green, Hand (3 sheets/pack)
      10 in stock!
      $11.95
      $11.95
    • Wax Remover Spray 2.0
      50 in stock!
      $18.95
      $14.95
    • Rode Wax Remover 2.1 150mL Spray bottle
      730 in stock!
      $15.95
      $15.95
    • Fiber Paper
      118 in stock!
      $17.95
      $17.95
    • Wall Ski Holder
      44 in stock!
      $29.95
      $29.95
    • Apron
      12 in stock!
      $29.95
      $29.95
    • Canadian Winter Sports ProForm-AL1 Wax Bench Station
      183 in stock!
      $289.95
      $289.95
    • Rode Iron Holder for Table.
      9 in stock!
      $119.95
      $119.95
Item is added to cart