Red Creek Rill Tools (aka structure tools) offer the widest variety of rill pattens on the market. The -5C/-20C Oblique Cut is great for colder winter conditions. It is a fine grooved tool for cold and fine grained snow. For a warmer temperature, apply more pressure on the tool for deeper structure. For colder temperatures, use less pressure with more passes if desired. The differing patterns of rill allow techs to tune the structure perfectly to match the snow`s moisture content. As a general rule, the coarser a structure tool is, the warmer the temperature it is used for. Red Creek also recommends to use a coarser tool than normal when higher speed is snow is applicable. Hand structure will revert with each fresh wax job. Keep your Red Creek structure tools functioning order by cleaning with wax remover and a ultrafine steel brush to remove excess wax and fluoros. Structure is vital in a post-fluoro waxing world. Get your much-needed tools here today.
Ships World-Wide! $5 shipping on orders over $100, Free-Shipping over $250 to North American addresses
• Red Creek Structure Rillers are made of stainless steel but should be handled with care in order to not damage the structure patterns. Keep dry and clean!
• 50mm wide tool with an open side. Must run tool along ski twice, once on each side.
