Features
- Bottle size is large: 80mL, with a foam dabber for application.
Cost Breakdown: How many pairs of skis can be waxed with this product?
80mL
50
$0.44 CAD
$
$
$
$
$
All Snow Types between °C and °C
Recommended for these snow types:
- Transformed
- Old
- Icy
- Man-Made
About this series:
Liquid grip waxes are suitable for all snow types and they can be applied on ski base easily without any tools. You get thin and even layer easily with sponge and the waxes are very durable. Apply and let it dry perfectly.
-
Vauhti GS BASE SUPER LIQUID GRIP (NF) | 80mL (All Temps)
![A liquid base binder.]()
- Regular price
- $22.00
- Sale price
- $22.00
- Unit price
- per
-
Vauhti KS UNIVERSAL LIQUID KLISTER (NF) | 80mL (10C/-1C)
![A liquid universal klister for damp to wet snow.]()
- Regular price
- $22.00
- Sale price
- $22.00
- Unit price
- per
-
Vauhti KS BASE LIQUID KLISTER (NF) | 80mL (All Temps)
![A liquid klister base binder.]()
- Regular price
- $22.00
- Sale price
- $22.00
- Unit price
- per
-
Vauhti GS CARROT LIQUID GRIP (NF) | 80mL (-2C/-20C)
![A liquid grip wax for cold temperatures, especially old/man-made snow.]()
- Regular price
- $22.00
- Sale price
- $22.00
- Unit price
- per
-
Vauhti GS VIOLET LIQUID GRIP (NF) | 80mL (-1C/-7C)
![A liquid grip wax for fresh and fine natural snow in warmer conditions.]()
- Regular price
- $22.00
- Sale price
- $22.00
- Unit price
- per
Application Methods
Safety Warning!
In the application process of some ski wax products, you and others can ba exposed to dangerous dust, fumes or residues. With the correct safety protolcols in place, these risks can be mitiagted and waxing can be very safe.
Safe Waxing protolcol:
- Always wax in a well-ventilated area. Outside is best. If you have to wax inside make sure there is some sort of air exchanger in place. Range hoods are best. Fans are better than nothing. Be sure to point out any lack of air exchanging equipment to the staff of any waxing facility or the race organizers.
- Whenever using any kind of heat in the waxing process (irons, heat guns, torches) always wear a respirator. Respirators that cover your eyes are best and check for a fluorocarbon rating on your respirator. Remember, the most dangerous fumes are not from powders but resins in grip wax and klisters. Wear a mask even when you are using non-fluorinated waxes since fumes from burnt paraffins are not OK to inhale. Respirators are required in the wax room.
- When creating any dust in the waxing process (brushing, scraping) always wear a respirator and gloves. Compounds in blocks, liquids, powders, klisters, and other hardwaxes can be absorbed through the skin. Wax companies keep their wax recipes secret so we have no idea what chemical compounds are present in most waxes nor their effects on the body. Always wear gloves while waxing to reduce your risk to negligible levels.
- People who are not waxing are not allowed in the wax room.
- Be sure to safely dispose of wax shavings and dust. Contained in a plastic garbage bag is adequate.
With the proper level of adult responsibility, any wax can be used perfectly safely and with negligible harm to the environment. Follow the correct safety protocols whenever you enter a wax room and be prepared with the right safety equipment. Remember to enjoy your fast skis to the max!
- Check your skis for grip zone markers. Kick wax is only applied to the zone under the binding of the ski leaving the tips and tails of the ski free for glide waxing. A good grip zone will be roughly two feet (60cm) long but will vary a lot depending on how stiff your skis are (the camber). Your local ski shop can help you find your grip zones, or you can use the zones pre-marked on the sidewalls of your skis. Use a permanent marker to redefine your grip zones as often as you can and experiment with extending your grip zone further forwards or backward to find the right feel while skiing.
- Prepare your grip zone by cleaning with wax remover and roughing with sandpaper.
- If the snow is icy or if you're planning on skiing more than 10km, apply a base binder. Using a liquid base binder is ideal since you are using liquid kick waxes anyway.
- At room temperature, apply the liquid kick wax using the foam dabber. Push the foam into the ski to release some liquid onto the ski, then gently spread it out until the entire kick zone is covered with an even layer of wax.
- Set the ski outside to cool. It could take 10min for the wax to fully cool.
- Apply another layer or two until you have your prefered kick wax thickness.
-
Rode Steel Table with Cross-Country Ski Form
![Steel Table with Cross-Country Ski Form]()
- Regular price
- $800.00
- Sale price
- $800.00
- Unit price
- per
How to Apply Liquid Hardwaxes
Instructional video in Finnish. English instructions below:
Liquid kick waxes are an incredibly easy way to apply kick wax. No need for a cork or even a wax bench!
Tools for the Job
Additives
- Hydrocarbons